Review Multi Pass Friction Stir Processing

Authors

  • Essam Moustafa PhD, Candidate, Shoubra Faculty of Engineering, Benha University, Egypt
  • Samah Mohammed Mechanical engineering Departiment, Shoubra Faculty of Engineering, Benha University, Egypt
  • Sayed Abdel-Wanis Mechanical engineering Departiment, Shoubra Faculty of Engineering, Benha University, Egypt
  • Tamer Mahmoud Mechanical engineering Departiment, Shoubra Faculty of Engineering, Benha University, Egypt
  • El-Sayed El-Kady Mechanical engineering Departiment, Shoubra Faculty of Engineering, Benha University, Egypt

Keywords:

Multi, Pass, FSP.

Abstract

The aim of this article is to provide a review of multiple passes friction stir processing technology and their effect on the microstructure refinement, improving mechanical properties furthermore enhancement of reducing distortion and defects in materials. Multi-pass FSP achieves uniform dispersion of reinforcement particles in the metal matrix composites. The present paper reviews the work done in the above mentioned areas and concludes the effect of multi-pass FSP on the mechanical properties.

References

[1] W. M. Thomas, E. D. Nicholas and S. W. Kallee, "Friction based technologies for joining and processing," TMS Friction Stir Welding and Processing Conference, November 2001,.
[2] R. Mishra and Z. Ma, "Friction stir welding and processing," Materials Science and Engineering, vol. 50, pp. 1-78, 2005.
[3] R. Nandan and T. Debroy, "process, weldment structure recent advances in friction stir welding and properties," progress in material science, vol. 53, pp. 980-1023, 2008.
[4] W. T. A. R. Rebecca Brown, "Multi-pass friction stir welding in alloy 7050-T7451: Effects on weld response variables and on weld properties," Materials Science and Engineering A, Vols. 513-514, p. 115–121, 2007.
[5] M. Barmouz and M. Kazem Besharati Givi, "Fabrication of in situ Cu/SiC composites using multi-pass friction stir processing: Evaluation of microstructural, porosity, mechanical and electrical behavior," Composites: Part A, vol. 42, p. 1445–1453, 2011.
[6] B. X. W. W. ,. Z. M. Z.Y. Liu, "Analysis of carbon nanotube shortening and composite strengthening in carbon nanotube/aluminum composites fabricated by multi-pass friction stir processing," carbon, vol. 69, p. 2 6 4 –2 7 4, 2014.
[7] R. M. L.B. Johannes, "Multiple passes of friction stir processing for the creation of superplastic 7075 aluminum," Materials Science and Engineering A, vol. 464, p. 255–260, 2007.
[8] E. A. E.-D. Magdy M. El-Rayes, "The influence of multi-pass friction stir processing on the microstructural and mechanical properties of Aluminum Alloy 6082," Journal of Materials Processing Technology, vol. 212, p. 1157–1168, 2012.
[9] A. Alavi Nia , H. Omidvar b and S. Nourbakhsh , "Effects of an overlapping multi-pass friction stir process and rapid cooling on the mechanical properties and microstructure of AZ31 magnesium alloy," Materials and Design, vol. 58, p. 298–304, 2014.
[10] D. NI, P. XUE and Z. MA, "Effect of Multiple-Pass Friction Stir Processing Overlapping on Microstructure and Mechanical Properties of As-Cast NiAl Bronze," Metallurgical and Materials Transactions A, vol. 42A, pp. 2125-2135, 2011.
[11] A. Rao, V. Katkar and G. Gunasekaran, "Effect of multipass friction stir processing on corrosion resistance of hypereutectic Al–30Si alloy," Corrosion Science, vol. 83, p. 198–208, 2014.
[12] J. L. C. S. S. M. G. B. J. M. T. J.F. Guo, "Effects of nano-Al2O3 particles addition on grain structure evolution and mechanical behavior of friction stir processed Al," Materials Science & Engineering A, vol. 602, p. 143–149, 2014.
[13] M. n. A. M. SarkariKhorrami, "The effect of SiC nanoparticles on the friction stir processing of severely deformed aluminum," Materials Science & Engineering A, vol. 602, p. 110–118, 2014.
[14] Z. Z. Y. Z. G. C. Y. G. M. L. J. Z. Rui Yang, "Effect of multi-pass friction stir processing on microstructure and mechanical properties of Al3Ti/A356 composites," Materials Characterization, vol. 106, p. 62–69, 2015.
[15] H. ,. M. ,. A. S. Sahraeinejad, "Fabrication of metal matrix composites by friction stir processing with different Particles and processing parameters," Materials Science & Engineering A, vol. 626, p. 505–513, 2015.
[16] M. SarkariKhorrami, M. N. Kazeminezhad and A. H. Kokabi, "The effect of SiC nanoparticles on the friction stir processing of severely," Materials Science & Engineering A, vol. 602, p. 110–118, 2014.
[17] S. Panigrahia, K. Kumara and W. Yuana, "Transition of deformation behavior in an ultrafine grained magnesium alloy," Materials Science and Engineering A, vol. 549, p. 123– 127, 2012.
[18] W. Yuan, S. Panigrahi and R. Mishra, "Influence of grain size and texture on Hall–Petch relationship for a magnesium alloy," Scripta Materialia, vol. 65, p. 994–997, 2011.
[19] Mishra, Rajiv Sharan, Partha Sarathi and N. Kumar, Friction Stir Welding and Processing, Switzerland: Springer International Publishing, 2014.
[20] P. Asadi, G. Faraji and M. A, "Experimental Investigation of Magnesium-Base Nanocomposite Produced by Friction Stir Processing: Effects of Particle Types and Number of Friction Stir Processing Passes," The Minerals, Metals & Materials Society and ASM International, vol. 42A, pp. 2820-2832, 2011.
[21] M. M. El-Rayesa and E. A. El-Danafa, "The influence of multi-pass friction stir processing on the microstructural and mechanical properties of Aluminum Alloy 6082," Journal of Materials Processing Technology, vol. 212, p. 1157–1168, 2012.
[22] K. Surekha, B. Murty and K. Prasad Raok, "Microstructural characterization and corrosion behavior of multipass friction stir processed AA2219 aluminium alloy," Surface & Coatings Technology, vol. 202, p. 4057–4068, 2008.
[23] K. J. Al-Fadhalah and A. I. Almazrouee , "Microstructure and mechanical properties of multi-pass friction stir processed aluminum alloy 6063," Materials and Design, vol. 53, p. 550–560, 2014.
[24] K. Nakata, . Y. Kima, H. Fujii and . T. Tsumura , "Improvement of mechanical properties of aluminum die casting alloy by multi-pass friction stir processing," Materials Science and Engineering, vol. 437, p. 274–280, 2006.
[25] Besharati-Givi and Asadi, Advances in Friction-Stir Welding and Processing, UK: Woodhead, 2014.

Downloads

Published

2016-07-20

How to Cite

Moustafa, E., Mohammed, S., Abdel-Wanis, S., Mahmoud, T., & El-Kady, E.-S. (2016). Review Multi Pass Friction Stir Processing. American Scientific Research Journal for Engineering, Technology, and Sciences, 22(1), 98–108. Retrieved from https://asrjetsjournal.org/index.php/American_Scientific_Journal/article/view/1891

Issue

Section

Articles