Design and Fabrication of a Three-Hopper Plantain Slicing Machine

Authors

  • Tawakalitu Bola Onifade Department of Agricultural Engineering, Ladoke Akintola University of Technology, Ogbomoso, PMB 4000, Nigeria.

Keywords:

plantain, slicing machine, three hoppers, design and fabricate.

Abstract

Plantain is a semi-perishable crop and large quantity is wasted due to deterioration during the peak of harvest. To ensure food security and to reduce wastage, the adoption of an effective processing into chips for preservation and availability throughout the year is necessary. Modern methods of slicing have greatly improved production rates and reduced slicing time. The main objective of this study was to design and fabricate plantain slicing machine so as to optimize its efficiency at low cost, reduce total time of slicing and produce hygienic and quality chips. The design of the-three hopper slicing machine was achieved through proper focus on the capacity, materials and other design criteria for various component parts. The slicer consists of two cutting discs, cutting chamber, three feeding chutes, the main frame and power transmitting unit. The result of the newly fabricated slicing machine shows that maintenance cost is cheap, slicing time of plantain chips is reduced, operation of the machine does not require special skill, the machine is easy and safe to operate, it is free of noise and vibration, the slicing method is continuous with two slicing blades provided inside the cutting chamber and energy for loading and unloading is reduced since three feeding chutes and large discharged outlet are provided. Slicing of plantain is safe since finger injury is reduced. The efficiency of the-three hopper plantain slicing machine is 97.37 % with capacity of 116.88 g/s. The slicer is therefore recommended for commercial use.

References

[1] FAO. Food and Agricultural Organization of United Nation. “Root tubers, plantains and banana in human nutrition series”, 24, Rome-Italy, 1990, pp. 37-45.
[2] IITA. International Institute of Tropical Agricultural. “A research report edited and produced in the publication of IITA unit of the information service program IITA”, Ibadan, Nigeria, 1996, pp. 20-22.
[3] A. Anonymous. (2008). “About plantain nutrition and processes”. Available online; http://www.plantain.be/nutritional=valves.of.plantain.php. [Retrieved March, 2009].
[4] N.U. Arisa., A.O. Adelekan, A.E. Alamu, and E. J. Ogunfowora. “The effect of pretreatment of plantain (Musa Paradisiacal) flour on the pasting and sensory characteristics of biscuit”. International Journal of Food and Nutrition Science, vol. 2(1), pp. 10-12, 2013.
[5] C. Nwanekezie and J.C. Ukagu. Nigeria Food Journal, vol. 17, pp. 55, 1999.
[6] FIIRO. Federal Institute of Industrial Research Organization. (2008). “Fabricated and design of machines”. Available at http://www.fiiro.org/engineering/projects/plantain-details.
[7] O.O. Awoluyi. “Design and construction of plantain slicer” unpublished MSc. thesis dissertation in Department of design and fabrication. Federal Institute of Industrial Research Organization, Oshodi, Nigeria, 2003.
[8] G.Y. Obeng. “Design and fabrication and testing of a mechanized plantain and carrot slicer”. Technology consultancy center Kwame Nkrumah University of Science, Accra, Ghana, vol. 24, (2), pp. 126-133, 2004.
[9] R.L. Earle and M.D. Earle. “Unit Operations in Food Engineering”. The New Zealand Institute of Food Science and Technology, (Inc.), Web Edition, New Zealand, 2004, pp. 287.
[10] P.J. Fellow. “Food processing, technology, principles and practice”. Ellis Horwood Limited, England, 1988, pp. 92-95.
[11] B.E. Okafor and C.V. Okafor. “Design of a plantain chips slicing machine”, International Journal of Engineering and Technology, vol. 3 (10), pp. 928-932. 2013.
[12] J.G. Brenna, J.R. Bulters, N.D. Cowell and A.E. Lilley.“Food Engineering Operation”, Third Edition, Elsevier Science Publisher Limited, London, 1990, pp. 69-85.
[13] J.C. Ehiem, S.V. Irtwange and S.E. Obetta. “Design and Development of an Industrial Fruit and Vegetable Dryer”. Research Journal of Applied Sciences, Engineering and Technology, ISSN: 2040-7467, Maxwell Scientific Organization, vol. 1 (2), pp. 44-53. 2009.
[14] T.B. Onifade. “Energy and Exergy Analyses of the thin layer of drying of physic nuts (Jatropha curcas)”, An Unpublished Ph.D Dissertation, Department of Agricultural Engineering, Ladoke Akintola University of Technology, Ogbomoso, Nigeria, 2015.
[15] R.P. Kachru, D. Balasubrmanna and K. Nchiket. “Design, Development and Evaluation of rotary slicer for raw banana chips”. Journal of Agricultural Mechanization, pp. 61-64, 1996.
[16] R.S. Khurmi and J.K. Gupta. “A text book of Machine Design”, Eyrasia Publishing House (put) LTD. Ram Nagar, New Dehil, 2004, pp. 1096.
[17] F.B. Akande and T.B. Onifade. “Modification of a plantain slicing machine”. Innovation System Design and Engineering, vol. 6 (10), pp. 41-53. 2015.
[18] S. Najeem, A. Daniel, H. Okanlawon, M. Orilade, P. Abioye and S.Adekanmi. “Construction of locally made plantain slicer”. An Unpublished B.Tech. Thesis, Department of Agricultural Engineering, LAUTECH, Ogbomoso, Nigeria, 2015.
[19] O.I. Odekunle. “Design and construction of a mechanical yam slicer”, An unpublished B.Sc. Thesis, Department of Agricultural Engineering, University of Ibadan, 1986.
[20] O.A. Saheed. “Design and construction of rotary plantain slicer”, An unpublished B.Tech Thesis, Department of Food Engineering, Nigeria, 2001.
[21] R.S. Khurmi and J.K. Gupta. “Theory of Machines”, Eurasia Publishing house, New Delhi, India, 2010.

Downloads

Published

2016-02-24

How to Cite

Onifade, T. B. (2016). Design and Fabrication of a Three-Hopper Plantain Slicing Machine. American Scientific Research Journal for Engineering, Technology, and Sciences, 17(1), 61–80. Retrieved from https://asrjetsjournal.org/index.php/American_Scientific_Journal/article/view/1384

Issue

Section

Articles